RX900 S2 Upgrade and Maintenance Manual 153
Expansion cards and BBU
8.8.1 Required tools
● Starting and completing the task:
– key for the rack doors (if applicable)
– Phillips Ph2 screw driver
● Removing the expansion card: tool-less
8.8.2 Starting the task
Ê Perform the following procedures:
1. "Opening the rack door" on page 40
2. "Shutting down the server" on page 41
3. "Sliding the server out of the rack" on page 42
4. "Removing the rear cover" on page 46
To Next Page
Loading...
