RX900 S2 Upgrade and Maintenance Manual 41
Basic procedures
4.3 Shutting down the server
V CAUTION!
Follow the safety instructions in the "Safety instructions" on page 31.
I This step is only applicable to replace or expand non-hot plug
components.
Ê Terminate all applications and shut down the server correctly.
Ê If your operating system has not switched off the server, press the On/Off
button.
Ê Pull all power cords out of the power outlets.
Authorized personnel
Authorized specialist personnel can carry out replacement tasks for
integral server components. Ask you local Fujitsu service center for
more detailed information.
V CAUTION!
Procedures indicated as "Authorized personnel only“ must be
done by Fujitsu service personnel or technicians trained by
Fujitsu for doing these tasks. Please note that unauthorized
interference with the system will void the warranty and exempt
the manufacturer from all liability.
To Next Page
Loading...
Need help?
General