Fujitsu PRIMERGY RX900 S2 - Starting the Task; Removing the PCI Riser

164 Upgrade and Maintenance Manual RX900 S2
Expansion cards and BBU
© cognitas. Gesellschft für Technik-Dokumentation mbH 2011 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-12050-001.fm
● Replacing the expansion card: tool-less
8.10.2 Starting the task
Ê Perform the following procedures:
1. "Opening the rack door" on page 40
2. "Locate the faulty server" on page 37
3. "Shutting down the server" on page 41
4. "Sliding the server out of the rack" on page 42
5. "Removing the rear cover" on page 46
6. "Locate the faulty component by PRIMERGY diagnostics indicators" on
page 39
8.10.3 Removing the PCI Riser
Figure 94: Removing the PCI Riser
0
1
/