Fujitsu PRIMERGY RX900 S2 Upgrade And Maintenance Manual

RX900 S2 Upgrade and Maintenance Manual 227
12 Front panel and external
connectors
V CAUTION!
Follow the safety instructions in the chapter "Safety instructions" on
page 31.
This section comprises procedures on:
● "Replacing the control panel" on page 228
● "Replacing the front panel module" on page 233
● "Replacing the USB board" on page 238
● "Replacing the I/O board" on page 241
Authorized personnel
Authorized specialist personnel can carry out replacement tasks for
integral server components. Ask you local Fujitsu service center for
more detailed information.
V CAUTION!
Procedures indicated as "Authorized personnel only“ must be
done by Fujitsu service personnel or technicians trained by
Fujitsu for doing these tasks. Please note that unauthorized
interference with the system will void the warranty and exempt
the manufacturer from all liability.

Fujitsu PRIMERGY RX900 S2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX900 S2
Category	Server
Language	English