222 Upgrade and Maintenance Manual RX900 S2
Optical and backup drives
© cognitas. Gesellschft für Technik-Dokumentation mbH 2011 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-12053-001.fm
V CAUTION!
● When forcing an accessible drive into a server, be careful so as not
to pinch the cable etc. connected to an accessible drive.
● Follow the safety instructions in the "Safety instructions" on page 31.
11.1.1 Required tools
● Starting and completing the task:
– key for the rack doors (if applicable)
– Phillips Ph2 screw driver
● Replacing the optical drive:
– Phillips Ph0 screw driver
11.1.2 Starting the task
Ê Perform the following procedures:
1. "Opening the rack door" on page 40
2. "Shutting down the server" on page 41
3. "Sliding the server out of the rack" on page 42
4. "Opening the server" on page 44
To Next Page
Loading...
Need help?
General