RX900 S2 Upgrade and Maintenance Manual 199
10 Processors
V CAUTION!
● Before installing/removing processors to/from the server, turn off the
server, all peripheral devices, and any other connected devices. Also
unplug all power cords from the power outlet. Failure to do so can
cause electric shock.
● Do not touch the circuitry on boards and soldered parts. Hold the
metallic areas or the edge of the circuit boards.
● When installing the processor, be careful not to bend the spring
contacts of the processor socket.
● Follow the safety instructions in "Safety instructions" on page 31.
Authorized personnel
Authorized specialist personnel can carry out replacement tasks for
integral server components. Ask you local Fujitsu service center for
more detailed information.
V CAUTION!
Procedures indicated as "Authorized personnel only“ must be
done by Fujitsu service personnel or technicians trained by
Fujitsu for doing these tasks. Please note that unauthorized
interference with the system will void the warranty and exempt
the manufacturer from all liability.
To Next Page
Loading...
Need help?
General