RX900 S2 Upgrade and Maintenance Manual 323
Cables
15.4.8 Removing the baseboard
Figure 215: Removing the baseboard
Ê Loosen the captive screws (1).
Ê Slide the baseboard approximately 1 cm in the direction of the arrow (2).
V CAUTION!
Make sure that you have removed all power supply units before
removing the baseboard. Otherwise, the power supply units or the
power distribution board might be damaged.
Ê Carefully lift the baseboard out of the chassis by using the handle (3).
/
/
0
1
To Next Page
Loading...
