RX900 S2 Upgrade and Maintenance Manual 237
Front panel and external connectors
Figure 145: Connecting the USB cable
Ê Connect the USB cable to the front panel module.
12.2.5 Completing the task
Ê Perform the following procedures to complete the task:
1. "Installing the control panel" on page 232
2. "Inserting the CPUMEMR in the slot" on page 186
3. "Closing the server" on page 47
4. "Mounting the server in the rack" on page 49
5. "Bringing the server back to operation" on page 51
6. "Closing the rack door" on page 51
To Next Page
Loading...
Need help?
General