RX900 S2 Upgrade and Maintenance Manual 47
Basic procedures
4.6 Closing the server
V CAUTION!
● Before attaching the covers, make sure no unnecessary parts or tools
are left inside the server.
● The housing covers must be replaced as soon as possible for
purposes of cooling, to comply with EMC regulations (regulations
regarding electromagnetic compatibility) and to prevent fires.
● Follow the safety instructions in the chapter "Safety instructions" on
page 31.
The three covers of the server can be closed independently of each other:
1. Front cover, see "Installing the front cover" on page 47
2. Fan cover, see "Closing the fan cover" on page 104
3. Rear cover, see "Installing the rear cover" on page 48
4.6.1 Installing the front cover
Figure 8: Installing the front cover
Trained personnel
/
0
To Next Page
Loading...
Need help?
General