Fujitsu PRIMERGY RX900 S2 - Disconnecting the BBU from the Modular RAID Controller

RX900 S2 Upgrade and Maintenance Manual 177
Expansion cards and BBU
8.12.3 Disconnecting the BBU from the Modular RAID
controller
Figure 103: Disconnecting the BBU from the Modular RAID controller
Ê Open the cable clamps (1).
Ê Disconnect the BBU cable from the SAS RAID controller (2).
Ê Remove the BBU holder from the chassis by lifting it with the green handle.
/
/
0