Fujitsu PRIMERGY RX900 S2 - Removing the Optical Drive; Replacing the Optical Drive in the Installation Frame

RX900 S2 Upgrade and Maintenance Manual 223
Optical and backup drives
11.1.3 Removing the optical drive
Figure 132: Removing the optical drive
Ê Disconnect the SATA cable (A) and the power cable (B) from the back of the
optical drive (1).
Ê Use the handle (C) to unlock the drive (2).
Ê Remove the optical drive from the bay (3).
11.1.4 Replacing the optical drive in the installation frame
Figure 133: Replacing the optical drive in the installation frame
C
A
C
B
C
C
/
0
1