Fujitsu PRIMERGY RX900 S2 - Page 182

182 Upgrade and Maintenance Manual RX900 S2
Main memory
© cognitas. Gesellschft für Technik-Dokumentation mbH 2011 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-12051-001.fm
The baseboard can be configured with up to 8 CPUMEMRs. Each CPUMEMR
includes one processor and can be equipped with up to 16 memory modules.
There are two ways to expand the main memory:
● Filling the empty slots of an already populated CPUMEMRs, see "Installing
additional DIMM memory modules" on page 191.
● Installing an additional CPUMEMRs, see "Installing a CPUMEMR" on
page 183.
I The number and location of available PCIe slots depends on the
CPUMEMR configuration. Make sure that the planned CPUMEMR
configuration enables you to use the PCIe slots needed for the individual
use case of the server.
For detailed information on configuration rules and supported memory
modules see "Baseboard D3144, CPUMEMR D3145, PCIR D3146 for
PRIMERGY RX900 S2 Technical Manual" or in the configurator using
the following link:
http://ts.fujitsu.com/products/standard_servers/rack/primergy_rx900s2.html
(for the EMEA market).