Fujitsu PRIMERGY RX900 S2

To Next Page

To Previous Page

26 Upgrade and Maintenance Manual RX900 S2

Before you start

Replacing a faulty component

The global error indicator on the front and on the rear side of the server indicates

that a hardware components needs to be replaced. For information on the

control elements and indicators of your server see "PRIMERGY RX900 S2

Server - Operating manual".

If the system has been powered off to replace a non-hot plug unit, a system of

PRIMERGY diagnostics indicators guides you to the faulty component. The

CSS button enables the indicator of the faulty component to light up even if the

power has been switched off, see "Using diagnostics information" on page 37.

If a defective component is included in the CSS concept, the CSS indicators on

the front and rear side of the server light up. For more information see the

"ServerView Suite Local Service Concept - LSC" manual and the "Customer

Self Service (CSS)" manual on the ServerView Suite DVD 2.

It is recommended to prepare local maintenance tasks by remote diagnostics

procedures introduced in the "ServerView Suite Local Service Concept - LSC"

manual on the ServerView Suite DVD 2.

Fujitsu PRIMERGY RX900 S2 - Page 26