Fujitsu PRIMERGY RX900 S2 Upgrade And Maintenance Manual

RX900 S2 Upgrade and Maintenance Manual 315
Cables
Figure 209: Connecting the chassis ID board cable
Ê Connect the chassis ID board cable (1).
Ê Slide the local service display inward until it clicks into place (2).
I In order to enable ServerView Operations Manager and ServerView
Installation Manager to identify the system, it is necessary to program the
chassis ID prom using the "ChassisIDProm Tool" after installing the new
chassis ID board. This tool is available for download from the following
Fujitsu Technology Solutions support page:
http://partners.ts.fujitsu.com/com/service/intelservers/tools
0
/

Fujitsu PRIMERGY RX900 S2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX900 S2
Category	Server
Language	English