4-13
6.
Specify the setting value using the [ ] [ ] icon or the [ ] icon.
You can set the range between 1 and 100.
Supplement
7.
Confirm the setting and press the [OK].
8.
Press the [START].
9.
Press the [YES].
The copy will start.
10.
If the number of copies is 2 or more, replace the media after the first copy is completed.
11.
Press the [OK] or [ENTER] key after replacing the media.
12.
Start copying the second sheet.
Repeat this action the specified number of times.
Cutting data is stored even if the media is exchanged.
It can be copied as many times until the buffer memory is cleared.
Supplement
To Next Page
Loading...
