GRAPHTEC CE8000 Series - Connecting Via Wired LAN; IP Address, Subnet Mask and Gateway Settings

9 -11
9.3 Connecting via wired LAN
This section explains the settings when connecting via wired LAN.
* Wired LAN unit is factory-installed option.
* If the wired LAN module is not installed, [---] will be displayed on the menu and you will not be able to open the setting items.
When connecting via wired LAN, set the following items.
• Entering the IP address
• Entering the subnet mask
• Entering the gateway
• DHCP setting
IP address, subnet mask and gateway settings
Set the IP address when selecting the [OFF] in the DHCP setting.
If you select the [ON] in the DHCP setting, the IP address, subnet mask and gateway obtained from the DHCP
server will be displayed.
Operation
1. Press the [ ] icon.
2. Press the [CONFIG].
3. Press the [COMMUNICATION].
4. Press the [WIRED LAN].
5. Press the [IP ADDRESS].