8-5
8.3
Setting Feed Speed for Pre Feed
Set the speed of media feed such as the feed (media carry) of auto media of received cut/plotting data.
Set the feed speed to "SLOW" if the media shifts during the Pre Feed when the heavy or slippery media is to be
used. It is normally set to "NORMAL".
This setting will be saved even if the power is shut off.
Supplement
Operation
1.
Press the [ ] icon.
2.
Press the [MEDIA].
3.
Press the [ ] icon.
4.
Press the [FEED SPEED].
5.
Press the feeding speed you want to use.
6.
Press the [ ] icon.
It will return to HOME screen.
To Next Page
Loading...
