GRAPHTEC CE8000 Series - Setting and Adjustment of ARMS; Automatically Adjust the Registration Mark Sensor Level

5-8
5.2 Setting and Adjustment of ARMS
This section describes the necessary adjustment and settings to correctly scan the registration mark with ARMS.
• Automatically adjust the registration mark sensor level
• Manually adjust the registration mark sensor level
• Test the registration mark sensor
• Adjust for the registration mark scan position
• Set the registration mark automatic detection
• Set speed of the registration mark scan
Automatically adjust the registration mark sensor level
Automatically adjusts the sensor level that scans the registration marks (threshold value for distinguishing between
the background color of the media and the registration mark line).
The sensor is adjusted to scan the registration mark plotted with a black line on a white background. Readjust the
sensor scanning level depending on the color and gloss of the media.
If automatic adjustment is difficult due to the surface properties of the media, manually set the sensor scanning
level.
Operation
1. Print a standard registration mark pattern (MARK TYPE).
(Either MARK TYPE 1 or MARK TYPE 2 can be used.)
MARK TYPE 1 MARK TYPE 2
•
For the level adjustment pattern, use the one with the registration mark color and registration mark line width
plotted on the media to be used.
•
Please download standard registration mark patterns from our website.
Registration Mark Pattern File Format File Name
MARK TYPE 1
pdf ARMStest_type1.pdf
eps ARMStest_type1.eps
MARK TYPE 2
pdf ARMStest_type2.pdf
eps ARMStest_type2.eps
Supplement
2. Load the printed media on the plotter.
3. Press the [ ] icon.