GRAPHTEC CE8000 Series - Enabling;Disabling the Beep Setting; LCD Contrast Setting

10-9
Enabling/Disabling the beep setting
You can turn off the buzzer sound.
If you want to enable the buzzer sound again, set it here.
Operation
1. Press the [ ] icon.
2. Press the [CONFIG].
3. Press the [GENERAL].
4. Press [BEEP] to turn it to [ON].
To cancel, set it to [OFF].
5. Press the [ ] icon.
It will return to HOME screen.
LCD contrast setting
You can set the contrast of the LCD display on the control panel.
Operation
1. Press the [ ] icon.