A-3
A.2
Options and Supplies
Supplies
Item Model Contents
Cutter plunger PHP33-CB09N-HS Used with φ0.9 mm diameter cutter blades (for CB09)
PHP33-CB15N-HS Used with φ1.5 mm diameter cutter blades (for CB15)
Water-based fiber-tip pen plunger PHP31-FIBER Plunger for water-based fiber-tip pen (set of 1)
Oil-based ballpoint pen plunger PHP34-BALL Plunger for oil-based fiber-tip pen (set of 1)
Water-based fiber-tip pen KF700-BK 1 set (10 pcs. Black)
KF700-RD 1 set (10 pcs. Red)
Oil-based ballpoint pen KB700-BK 1 set (10 pcs. Black)
Loupe for adjusting blade length for
cutter blade
PM-CT- 001 1 pc.
Carrier Sheet CR09300-A3 2 sht. (A3 size)
Cutting mat for CE8000-40 PM-CR-013 1 set
Cutting mat for CE8000-60 PM-CR-014 1 set
Cutting mat for CE8000-130 PM-CR-015 1 set
USB cable PM-ET-001 1 pc. (cable length: 2.9 m)
For detailed information about the cutter blade, refer to the Cutter Blade Manual.
The Cutter Blade Manual is available at:
http://www.graphteccorp.com/support/index.html
Please check our company's home page for the latest information on supplies.
Options
Item Model Contents Quantity
Basket PG0111 Used with CE8000-60 1 set
PG0112 Used with CE8000-130 1 set
Roll-medium tray OPH-A57 Used with CE8000-60 1 set
Carrier Sheet Table OPH-A45 Used with CE8000-40/60 1 set
Optional items may vary depending on the area. For details, please contact the distributor where you purchased.
Please check our company's home page for the latest information on supplies.
To Next Page
Loading...
