5-10
Manually adjust the registration mark sensor level
Manually set the level of the sensor that scan the registration marks (threshold value that distinguishes between the
background color of the media and the registration mark line).
The sensor is adjusted to scan the registration mark plotted with a black line on a white background. Adjust the
sensor scanning level depending on the color and gloss of the media.
Operation
1.
Press the [ ] icon.
2.
Press the [ARMS].
3.
Press the [SENSOR ADJUSTMENT].
4.
Press the [SENSING LEVEL].
•
For the sensing level, specify what percentage of the signal level difference between the background color
of the media and the registration mark is to be set as the threshold.
•
Set the level for sensing registration mark while moving in the X direction (feed direction of media) for X,
and the sensing level for sensing registration mark while moving in the Y direction (tool carriage movement
direction) for Y.
•
In the following cases, register marks may be scanned by increasing the value.
– When the color of the media and the color of the register mark are similar.
– When the registration mark passes past the position.
•
In the following cases, register marks may be scanned by decreasing the value.
– When a position with no registration mark is scanned.
– When folds or dirt on the media surface is scanned.
Supplement
5.
Press the [X].
To Next Page
Loading...
