GRAPHTEC CE8000 Series - Creating CUTTING PRO

15-21
15.5 Creating CUTTING PRO
Create a test pattern to check the operation of the plotter.
Operation
1. Load a media larger than A3 size.
2. Select the conditions that comply with the set tool.
3. Press the [ ] icon.
4. Press the [INFO].
5. Press the [ ] icon twice.
6. Press the [CUTTING PRO].
7. Press the [START].
Do not place you hand around the moving areas. The tool carriage will start moving, so there is a chance of
injury.
CAUTION
8. “CUTTING PRO” plotting will start.
9. It will return to READY status when the cutting is completed.