9-14
DHCP setting
DHCP settings depends on the network device configuration and your environment.
For details, see your device’s manual or consult your network administrator.
The default value of DHCP is [OFF].
Although the DHCP depends on the settings of the DHCP server, if the DHCP setting is turned on, the IP address of
this plotter may change every time the power is turned on.
Changing the IP address may cause problems such as not being able to receive data from the computer.
In order to avoid such problems, we recommend that you turn off the DHCP settings.
Supplement
Operation
1.
Press the [ ] icon.
2.
Press the [CONFIG].
3.
Press the [COMMUNICATION].
4.
Press the [WIRED LAN].
5.
Press [DHCP] to turn it to [ON].
To cancel, set it to [OFF].
To Next Page
Loading...
