GRAPHTEC CE8000 Series - Pre Feed of Media (Paper or Marking Film)

2-36
2.9 Pre Feed of Media (Paper or Marking Film)
The PRE FEED function is used to prevent the loaded media from slipping by automatically advancing the media
the specified length and imprinting it with grit roller marks. This function can also be used to acclimate long media
lengths to the operating environment in order to minimize media expansion and contraction, and to ensure stable
media feed operations.
When performing plotting/cutting longer than 2 m in CE8000-60/130, be sure to use a basket (option).
Operation
1. Press the [ ] icon.
2. Press the [MEDIA] icon.
3. Press the [PRE FEED].
4. Specify the setting value using the [ ] [ ] icon or the [ ] icon.
You can set the range between 0.5 m and 50 m.
Supplement
5. Confirm the setting and press the [OK].
Pre feed will start.
•
When Pre Feed of Media is performed, the following screen is displayed.
To cancel the Pre Feed, press the [CANCEL].
•
If you select "SHEET" in the media feeding, the Pre Feed will not be performed.
Supplement