9-5
10.
Confirm the entered information and press the [CONNECT].
If an error message is displayed, check the contents of the error message and reconfigure settings again.
Supplement
11.
Press the [YES].
When connected to an access point, a check mark will be displayed to the right of the access point name.
Supplement
12.
Press the [ ] icon.
13.
Press the [ ] icon.
It will return to HOME screen.
Set IP address, subnet mask and gateway
When [OFF] is selected in DHCP setting, set these items.
When [ON] is selected in the DHCP setting, the IP address, subnet mask and gateway obtained from the DHCP
server are displayed.
Operation
1.
Press the [ ] icon.
2.
Press the [CONFIG].
To Next Page
Loading...
