GRAPHTEC CE8000 Series - Move the Tool Carriage; Move in Steps Manually; Continuously Move Manually

3-3
3.2 Move the Tool Carriage
Tool carriage can be moved manually using the POSITION key.
It can move the tool carriage to the origin, or move it certain distance to keep it away.
Move in steps manually
It can manually move in steps when the screen is displaying "READY", or when the POSITION ( , , , ) key is
displayed.
Operation
1. Press the POSITION ( , , , ) key once to move in the desired direction.
Tool carriage or the media will move toward the direction of the pressed POSITION key for 1 step.
•
It will move in steps every time POSITION ( , , , ) key is pressed.
•
Distance of step movement can be changed. See "3.2 Move the Tool Carriage".
Supplement
Continuously move manually
It can manually move continuously when the screen is displaying "READY", or when the POSITION ( , , , )
keys are displayed.
Operation
1. Hold the POSITION ( , , , ) key down to keep moving in the desired direction.
Tool carriage or the media keeps on moving continuously in the direction of the pressed POSITION key.
Pressing the POSITION and [SLOW] keys at the same time will move the tool carriage slower.
Supplement
2. Release the POSITION ( , , , ) key.
Movement of the tool carriage or the media will stop.