11-5
Enabling/Disabling the ' : ' and ' ; ' commands
If the first part of the data is lost when the GP-GL command is set, these commands may be having an adverse
effect. In this case, set the ' : ' and ' ; ' commands to DISABLED.
Operation
1.
Press the [ ] icon.
2.
Press the [CONFIG].
3.
Press the [COMMAND].
4.
Press the [ ] icon.
5.
Press the [COMMAND ':',';'].
6.
Press the setting value you want to use.
7.
Press the [ ] icon.
It will return to HOME screen.
To Next Page
Loading...
