GRAPHTEC CE8000 Series - Setting Tool no

2-44
4. Press the tool condition number (1 to 8) you want to set.
5. Press the [ACCEL. (Acceleration)].
6. Specify the setting value using the [ ] [ ] icon or the [ ] icon.
The settable range varies depending on the model.
CE8000-40: 1 to 3
CE8000-60: 1 to 3
CE8000-130: 1 to 2
Supplement
7. Confirm the setting and press the [OK].
8. Press the [ ] icon.
It will return to HOME screen.
Setting tool No.
This section explains how to assign the tool number to use.
Operation
1. Press the [ ] icon.
2. Press the [EDIT CUT CONDITION].