2-45
3.
Press the [ ] icon twice.
4.
Press the tool condition number (1 to 8) you want to set.
5.
Press the [ASSIGN TOOL].
You can set to 1 or 3.
Supplement
6.
Press the tool number you want to use.
7.
Press the [ ] icon.
It will return to HOME screen.
•
Tool number and installed position
Tool 1: For half cut/plotter pen
Tool 3: For cutting out
Tool 1: When using a tool installed behind the tool holder
Tool 3: When using a tool installed in front of the tool holder
•
For information on how to install the tool, see "2.2 Attaching a Tool".
Supplement
To Next Page
Loading...
