9-8
17.
Confirm the numbers and press the [OK].
If you want to change the numbers for other separated numbers, repeat steps 15 and 16.
Supplement
18.
Press the [OK].
•
If you change the settings, the plotter will automatically restart and return to the HOME screen.
•
If you didn’t change any settings, proceed to step 19.
•
Press the [MAC ADDR.] button to display the MAC address.
Supplement
19.
Press the [ ] icon.
It will return to HOME screen.
DHCP setting
DHCP settings depends on the network device configuration and your environment.
For details, see your device’s manual or consult your network administrator.
The default value of DHCP is [OFF].
Although the DHCP depends on the settings of the DHCP server, if the DHCP setting is turned on, the IP address of
this plotter may change every time the power is turned on.
Changing the IP address may cause problems such as not being able to receive data from the computer.
In order to avoid such problems, we recommend that you turn off the DHCP settings.
Supplement
Operation
1.
Press the [ ] icon.
To Next Page
Loading...
