12-2
12.1
Select Connection Destination
Dedicated data created previously with application software etc. is output to the cutting plotter.
It can be saved in USB memory and output the data saved in USB memory, or output via server (personal
computer) using network or USB cable.
Operation
1.
Press the [ ] icon.
2.
Press the [LINK].
3.
Press the [DESTINATION].
•
"SERVER (LAN)" is displayed when the wired LAN module is installed.
•
"SERVER (WLAN)" is displayed when the wireless LAN module is installed.
Supplement
4.
Press the connection destination you want to use.
5.
Press the [ ] icon.
It will return to HOME screen.
To Next Page
Loading...
