GRAPHTEC CE8000 Series - Setting the Acceleration

2-43
4. Press the tool condition number (1 to 8) you want to set.
5. Press the [FORCE].
6. Specify the setting value using the [ ] [ ] icon or the [ ] icon.
You can set the range between 1 and 38.
Supplement
7. Confirm the setting and press the [OK].
8. Press the [ ] icon.
It will return to HOME screen.
Setting the acceleration
This section explains how to set the acceleration to be used.
Operation
1. Press the [ ] icon.
2. Press the [EDIT CUT CONDITION].
3. Press the [ ] icon twice.