14-6
14.5
Setting the Alarm for Blade Wear Alarm
This function allows to measure the cut distance of pen or cutter blade and use it as a guide to determine when the
cutter blade should be replaced.
BLADE WEAR DETECT ON/OFF, SET BLADE GROUP, ALARM DISTANCE and BLADE WEAR DETECT settings
are required.
Alarm function ON/OFF, group, alarm distance settings
Operation
1.
Press the [ ] icon.
2.
Press the [TOOL].
3.
Press the [BLADE WEAR ALARM SETUP].
4.
Press [BLADE WEAR DETECT.] to turn it to [ON].
To cancel, set it to [OFF].
5.
Press the [SET BLADE GROUP].
To Next Page
Loading...
