GRAPHTEC CE8000 Series - Page 218

14-7
6. Press the group number you want to assign for each tool condition number (1 to 8).
•
The horizontal axis represents the tool condition number (1 to 8) to be set. The vertical axis represents the
group number.
•
[ ] will be displayed at the assigned location.
Supplement
7. Press the [ ] icon.
8. Press the [YES].
9. Press the [ ] icon.
10. Use the [ ] and [ ] icons to display the group for which you want to set the alarm distance.
11. Press the group you want to set.
12. Press the [ALARM DISTANCE].