GRAPHTEC CE8000 Series - Selecting Tool Condition; Selecting the TOOL CONDITION Number (Condition No.)

2-37
2.10 Selecting Tool Condition
Set the “TOOL CONDITION (CUT CONDITION) No.”, “TOOL”, “OFFSET”, “SPEED”, “FORCE”, and “ACCEL
(ACCELERATION)”.
You can switch to the settings for each of the 8 preset media types.
Selecting the TOOL CONDITION number (Condition No.)
This section explains how to select the TOOL CONDITION number (Condition No.).
Operation: Operation with the [ ] icon
1. Press the [ ] icon.
2. Press the [CONDITION No.].
3. Use the [ ] and [ ] icons to display the tool condition number you want to use.
4. Press the tool condition number you want to use.
5. Press the [ ] icon.
It will return to HOME screen.
Operation: Operation with the [ ] icon
1. Press the [ ] icon.
2. Press the [COND No.] icon.