GRAPHTEC CE8000 Series - Setting the Force

2-42
5. Press the [SPEED].
6. Specify the setting value using the [ ] [ ] icon or the [ ] icon.
The settable range varies depending on the model.
CE8000-40: 1 to10 (in 1 cm/s increment), 10 to 60 (in 5 cm/s increment), 64
CE8000-60: 1 to10 (in 1 cm/s increment), 10 to 60 (in 5 cm/s increment), 64
CE8000-130: 1 to10 (in 1 cm/s increment), 10 to 70 (in 5 cm/s increment), 71
Supplement
7. Confirm the setting and press the [OK].
8. Press the [ ] icon.
It will return to HOME screen.
Setting the force
This section explains how to set the force to be used.
Operation
1. Press the [ ] icon.
2. Press the [EDIT CUT CONDITION].
3. Press the [ ] icon.