2-31
Contents to be operated from the [ ] icon - QUICK MENU screen
The contents that can be operated and set from the QUICK MENU screen are as follows.
COPY .................. Copies and outputs data in buffer memory.
ORIGIN ................ Sets the current tool position as the origin point (cutting point).
COND No. ........... Changes the cutting condition number.
VIEW ................... The tool carriage is moved away.
HOME .................. The tool carriage moves to the cutting origin position.
RESET ................. Returns to the state immediately after power-on.
Contents to be operated from the [ ] icon - [CONTINUOUS OPERATION] START screen
In the [CONTINUOUS OPERATION] START screen, the screen for starting continuous operation is displayed.
Same operation as when [ ] - [LINK] - [CONTINUOUS OPERATION] are selected
Supplement
How to operate the setting screen
This section describes using the [TOOLS SETTING] screen as an example.
When using the touch panel
• Go back one level up: Press [ ].
• Return to the HOME screen: Press [ ].
• Return to previous page: Press [ ].
• Go to the next page: Press [ ].
• Select of setting items: Press each setting item.
To Next Page
Loading...
