GRAPHTEC CE8000 Series - Contents to be Operated from the [ ] Icon - Menu Screen; Contents to be Operated from the [ ] Icon - CUT CONDITION Screen

2-30
Contents to be operated from the [ ] icon - Menu screen
The contents that can be operated and set from the MENU screen are as follows.
LINK..................... Performs operations necessary for output such as data links.
TOOL ................... Sets the conditions related to tool operation.
ARMS .................. Performs settings and operations related to alignment of tools and media, such as automatic
registration mark scanning using ARMS.
AREA ................... Sets the cutting plotting area, scale, rotation and mirror, etc.
MEDIA ................. Sets the conditions related to media.
CONFIG............... Sets the basic operating conditions of this plotter, such as the display language, length unit
and sensor.
Sets the conditions related to the interface with the connected computer.
INFO .................... Performs operations necessary for maintenance, such as diagnostic test and exporting
condition setting lists.
[ ] ....................... Used to close the menu screen and to return to the home screen.
[ ] ....................... Used to close the menu screen and to move to the condition screen.
For a list of setting items, see "A.4 Menu Tree."
Contents to be operated from the [ ] icon - CUT CONDITION screen
Set the tool conditions on the CUT CONDITION screen.
Tool conditions can be saved by assigning condition numbers 1 to 8 to each different setting.
[ ] ....................... Used to close the condition screen and to return to the HOME screen.
[ ] ....................... Used to close the CUT CONDITION screen and to return to the previous screen.
For "Tool Conditions", see "2.10 Setting the Tool Condition".