12-5
12.3
Output with a Bar Code
The information related to the output file is bar-coded using the Cutting Master 5 and Graphtec Studio 2, etc. and
the barcode can be printed with the design and the registration marks.
When cutting with the cutting plotter, the bar code is scanned and the cut data (XPF) that has been saved to a
USB memory that matches the bar code is detected.
Bar code Start mark
Continuous operation bar code
Practical examples of data links are included in the "Cutting Master 5 User’s Manual" and "Graphtec Studio 2 User’s
Manual".
Please download each User’s Manual from the URL listed in " Chapter 13 Cutting with supplied application software".
Supplement
Operation
1.
Insert the USB memory that saved the dedicated data to the plotter.
2.
Press the [ ] icon.
3.
Press the [LINK].
To Next Page
Loading...
