GRAPHTEC CE8000 Series - Related to GP-GL Command; Setting the GP-GL Step Size

11- 4
11.2 Related to GP-GL command
This section is useful only when using the GP-GL command.
Setting the GP-GL step size
The distance to travel with 1 step can be changed. Match the setting value of the application to be used.
Operation
1. Press the [ ] icon.
2. Press the [CONFIG].
3. Press the [COMMAND].
4. Press the [GP-GL STEP SIZE].
5. Press the setting value you want to use.
6. Press the [ ] icon.
It will return to HOME screen.