GRAPHTEC CE8000 Series - Main Specifications

A-2
A.1 Main Specifications
CE8000-40 CE8000-60 CE8000-130
CPU 32bit CPU
Configuration Grit-rolling plotter
Drive Digital servo
Max. Cutting Area 375 mm× 50 m 603 mm×50 m 1270 mm×50 m
Guaranteed precision cutting
area *1
355 mm× 2 m 583 mm×2 m
583 mm× 5 m *2
1250 mm×2 m
1250 mm×5 m *2
Available media width Min: 50 mm
Max: 484 mm (19 inch)
Min: 50 mm
Max: 712 mm (28 inch)
Min: 85 mm
Max: 137 2mm (54 inch)
Available roll media diameter Max. diameter: 180 mm, Min. diameter: 76 mm
Media weight that can be
loaded
5 kg 9 kg 17 kg
The number of push rollers 2 3
Max. cutting speed 90 cm/s (45°direction) 100 cm/s (45°direction)
Specifiable speeds (cm/s) 1 to 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 64 1 to 10, 15, 20, 25, 30, 35, 40, 45,
50, 55, 60, 65, 70, 71
Max. cutting force 4.41N (450gf)
Min. character size 5 mm (0.197 in.) alphanumeric Helvetica med. Font *1
Mechanical resolution 0.005mm
Programmable resolution GP-GL: 0.1 / 0.05/0.025/0.01mm
HP-GL *3 : 0.025mm
Repeatable accuracy *1 0.1 mm or less / in unit of 2 m (Designated Film and Cut Conditions)
Number of cutters/pens 1 pc.
Usable pen type Water-based fiber-tip and oil-based ballpoint
Compatible media Mono-vinyl chloride media, fluorescent media, and reflective media up to 0.25 mm thick (Excluding high-
intensity reflective film)
Interface USB 2.0 (Full Speed), Wireless LAN IEEE 802.11b/g/n, Ethernet 10 BASE-T/100 BASE-TX *5
Buffer memory 2 MB
Resident command sets GP-GL/HP-GL *3 (Control panel switching, Auto switching)
LCD display Touch panel (240-dot x 128-dot)
Power supply AC100-120V / AC200V-240V 50/60Hz
Power consumption 140W or less
Operating environment 10 to 35℃, 35 to 75% R.H. (non-condensing)
Guaranteed accuracy
environment
16 to 32℃, 35 to 70% R.H. (non-condensing)
External dimensions (Approx.)
(W × D × H)
677 × 451 × 266 mm *4 903 × 582 × 1076 mm *4 1644 × 811 × 1076 mm *4
Weight ( Approx.) 11 kg *4 21 kg *4 40 kg *4
*1: Varies depending on the type of Graphtec-authorized film and the cutting conditions.
*2: When using basket.
*3: HP-GL is a registered trademark of the US Hewlett Packard Company.
*4: Roll-medium tray or stand is included.
*5: This is an option provided at the factory.