GRAPHTEC CE8000 Series - How to Operate the Control Panel Screen

2-29
How to operate the control panel screen
You can operate this plotter using either the touch panel or operation keys.
How to operate the HOME screen (READY state)
When using the touch panel
Use the [ ], [ ], [ ] and [ ] icons.
When using the operation keys
Hold down the [ENTER] key and press the POSITION ( , ) keys to select the [ ], [ ], [[ ] or [ ] icon.
Release the [ENTER] key to move to each menu.
[ ] icon
[CONTINUOUS
OPERATION] START screen
[ ] icon
QUICK
MENU screen
[ ] icon
CUT CONDITION
screen
[ ] icon
MENU
screen
There are screens other than the Home screen that have the above icons.
Move to each menu by pressing the icon.
Supplement
How to operate the MENU screen
When using the touch panel
Press the icon.
When using operation keys
Select the icon using the POSITION ( , , , ) keys. Press the [ENTER] key.