8-9
8.6
Setting the Tool Up Height
The TOOL UP HEIGHT is the height of the tool position when the tool is raised.
Set to "HIGHER POSITION" if the media is thick. Usually, set to the "NORMAL POSITION".
This setting will be saved even if the power is shut off.
Supplement
Operation
1.
Press the [ ] icon.
2.
Press the [TOOL].
3.
Press the [ ] icon.
4.
Press the [TOOL UP HEIGHT].
5.
Press the tool up height you want to use.
6.
Press the [ ] icon.
It will return to HOME screen.
To Next Page
Loading...
