1-14
When using wireless LAN
Connection
1.
Check that the power switch is turned off (the " " side is pressed down).
2.
Remove the wireless LAN module cap.
* This section explains in the CE8000-130.
Wireless LAN module cap
3.
Install the wireless LAN module to the wireless LAN connection terminal.
Wireless LAN module
Hole
Make sure that the wireless LAN module is firmly installed all the way.
Supplement
4.
Secure the wireless LAN module cover and the wireless LAN module with screws using a phillips
screwdriver.
Wireless LAN module cover
Screws
•
Please prepare your own phillips screwdriver.
•
For wireless LAN settings, see "9.2 Connecting via wireless LAN"
Supplement
To Next Page
Loading...
