11-7
11.3
Related to HP-GL command
This section is useful only when using the HP-GL command
Model ID response
This function set the operation upon receipt of the "OI" command requesting for the model ID.
The reply will be 7550 when set to 7550, and 7586 when set to 7586.
Operation
1.
Press the [ ] icon.
2.
Press the [CONFIG].
3.
Press the [COMMAND].
4.
Press the [ ] icon.
5.
Press the [HP-GL MODEL EMULATED].
6.
Press the setting value you want to use.
7.
Press the [ ] icon.
It will return to HOME screen.
To Next Page
Loading...
