14-4
14.3
Cleaning the Cutter Plunger
Letting leftover media and paper dust build up on blades can dull them and cause them to deteriorate. Be sure to
clean the cutter plunger regularly and remove build up.
To avoid bodily injury, handle cutter blades with care.
Cleaning
1.
Please clean off paper dust and media powder build up from the blade.
After cleaning it, return it to its proper place.
Spin the plunger cap, remove it, and then clean the blade entrance area.
Cutter blade
Plunger-cap
Plunger
PHP33-CB09N-HS/PHP33-CB15N-HS
Cleaning
2.
After completing cleaning, attach the plunger cap.
To Next Page
Loading...
