GRAPHTEC CE8000 Series - Tool Offset Setting

2-40
5. Use the [ ] and [ ] icons to display the tools you want to use.
6. Press the tool you want to use.
The tools that you can select are [PEN], [CB09U], [CB09U-K60], [CB15U] and [OTHER].
Supplement
7. Press the [ ] icon.
It will return to HOME screen.
Tool offset setting
This section describes how to set the tool offset you want to use.
Operation
1. Press the [ ] icon.
2. Press the [EDIT CUT CONDITION].
3. Press the tool condition number (1 to 8) you want to set.
4. Press the [OFFSET].