10-8
Media set assist settings
Media set assist is an auxiliary function that operates a suction fan when loading media to make it easier to load
the media.
•
Depending on the type of media, using Media Set Assist may make it difficult to set the media. In this case, please
make the setting to [OFF].
•
The strength of suction is linked to the [FAN] setting.
•
Media set assist operates when the media sensor detects media while the HOME screen is displayed (only while the
media set lever is down).
Supplement
Operation
1.
Press the [ ] icon.
2.
Press the [CONFIG].
3.
Press the [GENERAL].
4.
Press the [ ] icon twice.
5.
Press [MEDIA SET ASSIST] to turn it to [ON].
To cancel, set it to [OFF].
The default value has been set to [ON].
Supplement
6.
Press the [ ] icon.
It will return to HOME screen.
To Next Page
Loading...
