GRAPHTEC CE8000 Series - Creating Test Pattern

15-19
15.4 Creating Test Pattern
Create a self-test pattern to check the operation of the plotter.
Operation
1. Load a media larger than A3 size.
2. Set the pen tool to the tool holder (Backward) and select the condition where the pen tool is set.
3. Press the [ ] icon.
4. Press the [INFO].
5. Press the [ ] icon.
6. Press the [SELF TEST].
7. Press the [START].
Do not place you hand around the moving areas. The tool carriage will start moving, so there is a chance of
injury.
CAUTION
8. The self-test will start.