12-9
12.5
Skew Scanning
When continuous operation is performed, it is possible to set how much skewis allowed by detecting media skew
by comparing the start mark positions of the start page and the current page.
For continuous operation, see Instruction manual for each application software.
Operation
1.
Press the [ ] icon.
2.
Press the [LINK].
3.
Press the [ ] icon.
4.
Press the [AUTOMATIC SKEW DETECTION].
5.
Press the setting value you want to use.
When continuous operation is performed, it is possible to set how much skew is allowed by comparing the
start mark position on previous page.
Supplement
6 .
Press the [ ] icon.
It will return to HOME screen.
To Next Page
Loading...
